How to remove the rusty water pipe joint?

How to remove the rusty water pipe joint? In fact, the method is still simple, mainly including the following four methods:

1. If the rusty water pipe joint is removed, we can use gasoline or loose liquid. Because both gasoline and loose liquid have certain rust removal function, we can find some gasoline to apply it to the rusted place, so that it can be cleaned after a series of chemical reactions, and finally the rust removal function can be achieved. Then the rusted water pipe joint can be removed!

2. After the water pipe joint is rusty, we can use the pipe clamp to clamp the rusty joint, twist the joint, and then shave the water pipe joint with a chisel. After repeated several times, the rusty water pipe joint can also be removed.

3. If it is difficult to remove the water pipe joint after it is rusted, we can also use gas welding or fire baking to remove it, because there will be a lot of rust after the water pipe is rusted, so it will be much more convenient for us to use the blowtorch to heat and then remove it.

4. After the pipe joint rust, when we tried all kinds of methods can not be dismantled, we can use destructive treatment to dismantle the water pipe joint. At this time, we can directly use a steel saw to cut the water pipe, or drill out the inner joint and install a new connector again!