What are the disadvantages of no hot melt quick connector

1、 Disadvantages of non hot melt quick joint

Many people are worried about the habit of water leakage of non hot melt quick connector. In fact, as long as it is properly installed and the water pressure is not too high, there will be no water leakage under normal circumstances. However, when the water pressure is too high, it is not recommended to install the non hot melt quick connector. After a long time, it is inevitable that there will be water leakage, resulting in difficult maintenance. It is convenient to install and replace the non hot melt quick connector, and the service life is relatively long, which can reach about 20 years.

2、 Precautions for installation of water pipe joint

1. Cleaning up impurities

Before the installation of the water pipe joint, all kinds of impurities in the pipe should be cleaned up, mainly to prevent the damage of the pipe valve core, blockage and leakage, and to clean up the residual impurities on the surface.

2. Don't use too much force when switching

In the use of water pipe joint attention to gently twist can not use too much force, even the traditional home water pipe joint is also so. The handle should not be used as a handrail, so as not to break due to excessive gravity. Regularly clean the stains on the screen cover products. If there are hose products, pay attention to the hose in a natural stretching state, otherwise it is easy to break.

3. The joints of water pipes for home decoration should be kept stretched

In accordance with the water pipe joint, the metal soft part of the water pipe shower head must present a natural state, and the remaining hose cannot be coiled on the tap. When using or not using, pay attention to the joint between the hose and the valve body, so as not to damage the hose.